Technical specifications
- Output: 40 lbs/min(18.14 kg/min)
- Max Working Pressure: 2,000 psi (138 bar)
- Max Hose Length: 410 ft (121.9 m)
- Heater Wattage: 15,000 watts Total (Dual htr)
- 18,000 watts Total (Dual htr)
- 21,000 watts Total (Dual htr)
- Hose Heating Power: 120 Volts
- Max Fluid Temperature: 190 F (87.7 C)
- Air Consumption @ 100 psi (6.9 bar) Not Applicable
- Main Voltage: 1 x 208-230V, 60 Hz
- Electrical @ 230V Single Phase: 116A–15,000W heaters
- 129A–18,000W heaters
- 142A–21,000W heaters
- Main Voltage: 3 x 208-230V, 50/60 Hz,
- 3 x 380V, 50/60 Hz
- Electrical @ 230V Three Phase: 67A–15,000W heaters
- 75A–18,000W heaters
- 82A–21,000W heaters
- Dimensions: (101cm x 66cm x 132cm)
- Weight: 251.7 kg
Standard Features
The PMC “Classic” Series PH/PHX was “Designed with the Customer in Mind” to provide applicator friendly and serviceability to meet today’s market place demands.
The electrical console has been designed to eliminate the use of delicate circuit boards and displays.
The open frame design format allows easy access to all components. Automatic ISO lubrication system.
Manual Hose Heat Tap Settings to match length of hose being used. Pressure Balance Control (PBC).
The reversing system is initiated by proximity switches and controlled by solid state relays to virtually assure maintenance free operation and long service life.
The Auto Shut Down Counter stops the machine before the drum runs empty avoiding possible cavitation, downtime and spraying off ratio material. The counter is adjustable to be set by the operator.
Point to Point wiring scheme makes troubleshooting a snap. All components are easily replaceable and readily available.
Opposed piston pumping is the industry benchmark and includes durable and easily serviceable ball checks.
The temperature sensing unit (TSU) operates in real time, sending a signal to the controller to maintain the chemical at the optimum temperature. The hermocouple that reads the temperature can be quickly replaced without removing the TSU block, a unique design feature that saves time and money.
Available up to 21Kw of heat, 2000-3500 psi and fixed ratios of up to 1.5:1, 2:1, 3:1, & 4.3:1.